Making a bin

Make a small-parts box on a 21 mm grid. The 3D preview updates as soon as you change a setting.

1. Set the number of cells with Width (X) and Depth (Y). 1 cell = 21 mm (outer size = cells × 21 mm − 0.5 mm).
2. Enter the height in mm. This is the total height including the feet.
3. To change the wall thickness, tick the box to unlock the slider (default 1.2 mm).
4. Turn on the stacking lip to stack bins of the same system. The total height stays the same; the inside gets shallower by the lip.
5. Under Shape, choose square or rounded outer corners, and an optional scoop (front ramp).
6. Under Dividers, set the number of columns / rows and the divider thickness.
7. Use "Export" at the bottom right to download the STL.

Export (STL / open in slicer)

Press "Export" at the bottom right of each generator to choose how to export.

• Download STL: saves a file that works with any slicer.
• Open in Bambu Studio / Creality Print: available once the site is published on a server (the browser and slicer ask for confirmation the first time).